USB Storage
56
N300 Wireless ADSL2+ Modem Router DGN2200v3
The ReadySHARE print feature allows you to share a printer that you connect to the USB
port on your router. To use the ReadySHARE print feature on a Windows PC, you need to
use the NETGEAR USB Control Center utility. For information about this feature, see Chapter
6, ReadySHARE Printer.
To access your USB device:
1. Click the network device name or the share name in your computer
’s network folders
list.
2. For SMB://readyshare, click Connect.
Note: If you logged in to the modem router before you connected your
USB device, you might not see your USB device in the modem
router screens. If this happens, log out and then log back in.
Add or Edit a Network Folder
1. You can access this feature by selecting Basic > ReadySHARE, and clicking Edit, or
selecting Advanced > USB Storage > Advanced Settings.
2. Specify the changes that you want to make:
To Next Page
Loading...
Need help?
General
