USB Storage
60
N300 Wireless ADSL2+ Modem Router DGN2200v3
2. Click the Approved Devices button. The USB Drive Approved Devices screen displays:
This screen shows the approved USB devices and the available USB devices. You can
remove or add approved USB devices.
3. To add an approved USB device, select it from the Available USB Devices list, and then click
Add.
4. Select the Allow only approved devices check box.
5. Click Apply so that your change takes ef
fect.
If you want to work with another USB device, first click the Safely Remove USB Device
button for the currently connected USB device. Connect the other USB device, and repeat
this process.
Connect to the USB Drive from a Remote Computer
To connect to the USB drive from remote computers with a web browser, use the modem
router’s Internet port IP address. If you are using Dynamic DNS, you can type the DNS name,
rather than the IP address. You can view the modem router’s Internet IP address from the
dashboard on the Basic Home screen or the Advanced Home screen.
Access the Modem Router’s USB Drive Remotely Using FTP
To connect to the modem router’s USB drive using a web browser:
1. Connect to the modem router by typing ftp:// and the Internet port IP address in the
address field of Internet Explorer or Netscape Navigator
, for example:
ftp://10.1.65.4
If you are using Dynamic DNS, you can type the DNS name, rather than the IP address.
2. T
ype the account name and password that has access rights to the USB drive. The user
name (account name) for All – no password is guest.
3. The directories of the USB drive that your account has access to are displayed, for example,
share/partition1/directory1.
You can now read and copy files from the USB directory.
To Next Page
Loading...
Need help?
General
