Advanced Settings
98
N300 Wireless ADSL2+ Modem Router DGN2200v3
Remote Management
The remote management feature lets you upgrade or check the status of your N300 Wireless
ADSL2+ Modem Router over the Internet.
To set up remote management:
1. Select Advanced >
Advanced Setup > Remote Management.
Note: Be sure to change the modem router’s default login password to a
secure password. The ideal password contains no dictionary words from any
language and contains upper-case and lower-case letters, numbers, and
symbols. It can be up to 30 characters.
2. Select the T
urn Remote Management On check box.
3. Under
Allow Remote Access By, specify the external IP addresses to be allowed to access
the modem router’s remote management.
Note: For enhanced security, restrict access to as few external IP addresses
as practical.
• T
o allow access from a single IP address on the Internet, select Only This Computer.
Enter the IP address that will be allowed access.
• T
o allow access from a range of IP addresses on the Internet, select IP Address
Range. Enter a beginning and ending IP address to define the allowed range.
• T
o specify IP addresses, select IP Address List and type in the allowed IP
addresses.
To Next Page
Loading...
Need help?
General
