NETGEAR DGN2200v3 User Manual

Hardware Setup
17
N300 Wireless ADSL2+ Modem Router DGN2200v3
Verify the Cabling
Verify that your modem router is cabled correctly by checking the modem router LEDs. Turn
on the modem router by pressing the On/Off button on the back.
• The Power LED is green when the modem router is turned on.
•
The LAN ports are green for each computer cabled to the modem router by an
Ethernet cable.
•
The WiFi LED is green when the modem router is turned on.
•
The DSL LED is green when you have a DSL connection.
•
The Internet LED is red when there is no Internet connection.
Turn on your computer. If software usually logs you in to your Internet connection, do not run
that software. Cancel it if it starts automatically
.
Verify that the LAN LEDs (1 through 4) are lit for any computers cabled to the modem
router by an Ethernet cable.

NETGEAR DGN2200v3 Specifications

General

Brand	NETGEAR
Model	DGN2200v3
Category	Wireless Router
Language	English