Security
78
N300 Wireless ADSL2+ Modem Router DGN2200v3
1. On the Port Triggering screen, click Add Service. The following screen displays:
2. In the Service Name field, type a descriptive service name.
3. In the Service User list, select
Any (the default) to allow any computer on the Internet to use
this service. Otherwise, select Single address, and enter the IP address of one computer to
restrict the service to a particular computer.
4. Select the service type, either TCP or UDP or both (TCP/UDP). If you are not sure, select
TCP/UDP
.
5. In the
Triggering Port field, enter the number of the outbound traffic port that will cause the
inbound ports to be opened.
6. Enter the inbound connection port information in the Connection
Type, Starting Port, and
Ending Port fields.
7. Click Apply.
The service appears in the Port Triggering Portmap Table.
Schedule Blocking
You can specify the days and time that you want to block Internet access.
To schedule blocking:
1. Select Advanced > Security > Schedule to display the following screen:
To Next Page
Loading...
Need help?
General
