NETGEAR genie Advanced Home
48
N300 Wireless ADSL2+ Modem Router DGN2200v3
4. Click Apply to enter the reserved address into the table.
The reserved address is not assigned until the next time the computer contacts the
modem router’
s DHCP server. Reboot the computer, or access its IP configuration and
force a DHCP release and renew.
To edit or delete a reserved address entry, select the radio button next to the reserved
address you want to edit or delete.
Then click Edit or Delete.
Quality of Service (QoS) Setup
QoS is an advanced feature that can be used to prioritize some types of traffic ahead of
others. The N300 Wireless ADSL2+ Modem Router can provide QoS prioritization over the
wireless link and on the Internet connection.
To configure QoS:
Select Advanced > Setup > QoS Setup to display the following screen:
Enable WMM QoS for Wireless Multimedia Applications
The N300 Wireless ADSL2+ Modem Router supports Wi-Fi Multimedia Quality of Service
(WMM QoS) to prioritize wireless voice and video traffic over the wireless link. WMM QoS
provides prioritization of wireless data packets from different applications based on four
access categories: voice, video, best effort, and background. For an application to receive
the benefits of WMM QoS, both it and the client running that application have to have WMM
enabled. Legacy applications that do not support WMM and applications that do not require
QoS, are assigned to the best effort category, which receives a lower priority than voice and
video.
WMM QoS is enabled by default. You can disable it in the QoS Setup screen by clearing the
Enable WMM check box and clicking Apply.
Set Up QoS for Internet Access
You can give prioritized Internet access to the following types of traffic:
• Specific applications
To Next Page
Loading...
Need help?
General
