NETGEAR genie Advanced Home
41
N300 Wireless ADSL2+ Modem Router DGN2200v3
• To use the PIN method, select the PIN Number radio button, enter the client security
PIN, and click Next.
Within 2 minutes, go to the client device and use its WPS software to join the network
without entering a password.
The modem router attempts to add the WPS-capable device. The WPS LED on the
front of the modem router blinks green. When the modem router establishes a WPS
connection, the LED is solid green, and the modem router WPS screen displays a
confirmation message.
4. Repeat Step 2 and Step 3 to add another WPS client to your network.
Setup Menu
Select Advanced > Setup to display the Setup menu. The following selections are available:
• Internet Setup. Go to the same Internet Setup screen that you can access from the
dashboard on the Basic Home screen. See Internet Setup on page 26.
• W
ireless Setup. Go to the same Wireless Settings screen that you can access from the
dashboard on the Basic Home screen. See Basic Wireless Settings on page 33.
• Guest Network.
This selection is a shortcut to the same Guest Network screen that you
can access from the dashboard on the Basic Home screen. See Guest Networks on
page 36.
• W
AN Setup. Internet (WAN) setup. See WAN Setup on page 42.
• LAN Setup. Local area network (LAN) setup. See LAN Setup on page 45.
• QoS Setup. Quality of Service (QoS) setup. See Quality of Service (QoS) Setup on
page 48.
To Next Page
Loading...
Need help?
General
