162 | Chapter 5: Managing Device Security
FS728TP Smart Switch Software Administration Manual
To configure 802.1X settings for the port:
1. Select the check box next to the port to configure. You can also select multiple check
boxes to apply the same settings to the selected ports, or select the check box in the
heading row to apply the same settings to all ports.
2. For the selected port(s), specify the following settings:
• Port Control. Defines the port authorization state. The control mode is only set if the
link status of the port is link up. The possible field values are:
• Auto: Automatically detects the mode of the interface.
To Next Page
Loading...
Need help?
General