Chapter 2: Configuring System Information | 51
FS728TP Smart Switch Software Administration Manual
To configure global timer settings:
1. Specify the Timer Schedule administrative mode. If the mode is disabled, no timers are
used.
2. To add a timer, enter a name in the Timer Schedule Name field, and click Add.
3. To remove a timer, select the check box associated with the timer and click Delete.
4. To enable or disable the timer feature, select the appropriate radio button and click Apply.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Timer Schedule Configuration
Use the Timer Schedule Configuration page to configure when the power to a port is turned
off. For example, you can specify that the power is turned off every night, during the
weekend, or during the same one-week period every year.
To display the Timer Schedule Configuration page, click System > PoE > Advanced > Timer
Schedule Configuration.
To Next Page
Loading...
Need help?
General