166 | Chapter 5: Managing Device Security
FS728TP Smart Switch Software Administration Manual
Click Refresh to update the information on the screen.
Traffic Control
From the Traffic Control link, you can configure MAC Filters, Storm Control, Port Security,
and Protected Port settings. To display the page, click the Security Traffic Control tab.
The Traffic Control folder contains links to the following features:
• MAC Filter:
• MAC Filter Configuration on page 166
• MAC Filter Summary on page 168
• Storm Control on page 168
• Port Security:
• Port Security Configuration on page 170
• Port Security Interface Configuration on page 171
• Security MAC Address on page 172
• Protected Ports Membership on page 173
MAC Filter Configuration
Use the MAC Filter Configuration page to create MAC filters that limit the traffic allowed into
and out of specified ports on the system.
To display the MAC Filter Configuration page, click Security Traffic Control, and then click
the MAC Filter MAC Filter Configuration link.
Reauthentication Enabled Displays if reauthentication is enabled on the selected port. This is a
configurable field. The possible values are true and false. If the value is true,
reauthentication will occur. Otherwise, reauthentication will not be allowed.
Port Status This field displays the authorization status of the specified port. The possible
values are Authorized, Unauthorized, and N/A. If the port is in detached
state, the value will be N/A since the port cannot participate in port access
control.
Field Description
To Next Page
Loading...
Need help?
General