NETGEAR FS728TPv2 User Manual

106 | Chapter 3: Configuring Switching Information
FS728TP Smart Switch Software Administration Manual
The following table displays information about the global IGMP snooping status and statistics
on the page.
IGMP Snooping Interface Configuration
Use the IGMP Snooping Interface Configuration page to configure IGMP snooping settings
on specific interfaces.
To access the IGMP Snooping Interface Configuration page, click Switching Multicast 
IGMP Snooping  IGMP Snooping Interface Configuration.
To configure IGMP Snooping interface settings:
1. To configure IGMP Snooping settings for a physical port, click PORTS.
2. To configure IGMP Snooping settings for a Link Aggregation Group (LAG), click LAGS.
Field Description
Multicast Control Frame
Count
Displays the number of multicast control frames that have been processed
by the CPU.
Interfaces Enabled for IGMP
Snooping
Lists the interfaces currently enabled for IGMP Snooping. To enable
interfaces for IGMP snooping, see
IGMP Snooping Interface Configuration
on page 106.
Data Frames Forwarded by
the CPU
Displays the number of data frames forwarded by the CPU.
VLAN Ids Enabled For IGMP
Snooping
Displays VLAN IDs enabled for IGMP snooping. To enable VLANs for IGMP
snooping, see
IGMP Snooping VLAN Configuration on page 111.
VLAN Ids Enabled For IGMP
Snooping Querier
Displays VLAN IDs enabled for IGMP snooping querier.

NETGEAR FS728TPv2 Specifications

General

Brand	NETGEAR
Model	FS728TPv2
Category	Switch
Language	English