88 | Chapter 3: Configuring Switching Information
FS728TP Smart Switch Software Administration Manual
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
7. If you make any changes to this page, click Apply to send the updated configuration to the
switch.
Voice VLAN Port Setting
To display the Voice VLAN Port Setting page, click Switching Voice VLAN Advanced
Port Setting.
To configure Voice VLAN port settings:
1. Select the check box next to the port to configure. You can select multiple check boxes
to apply the same setting to all selected ports.
2. From the Voice VLAN Mode menu, specify whether to enable or disable Voice VLAN on
the selected port.
3. From the Voice VLAN Security menu, specify whether to enable or disable Voice VLAN
security on the selected port.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5. If you make any changes to this page, click Apply to send the updated configuration to the
switch.
Note: The Membership field displays whether the current operational
status of the voice VLAN on the interface is active or not active.
To Next Page
Loading...
Need help?
General