NETGEAR FS728TPv2 - System Logs; Memory Logs

Chapter 6: Monitoring the System | 203
FS728TP Smart Switch Software Administration Manual
System Logs
The switch may generate messages in response to events, faults, or errors occurring on the
platform as well as changes in configuration or other occurrences. These messages are
stored locally and can be forwarded to one or more centralized points of collection for
monitoring purposes or long term archival storage. Local and remote configuration of the
logging capability includes filtering of messages logged or forwarded based on severity and
generating component.
The Monitoring  Logs tab contains links to the following folders:
• Memory Logs on page 203
• FLASH Log Configuration on page 205
• Server Log Configuration on page 207
• Trap Logs on page 208
• Event Logs on page 210
Memory Logs
The in-memory log stores messages in memory based upon the settings for message
component and severity. Use the Memory Logs page to set the administrative status and
behavior of logs in the system buffer. These log messages are cleared when the switch
reboots.
To access the Memory Log page, click the Monitoring  Logs tab, and then click the
Memory Log link.