52 | Chapter 2: Configuring System Information
FS728TP Smart Switch Software Administration Manual
Note: For a timer schedule to operate, the switch clock source must be
SNTP. Use the System > Time page to configure the clock source.
For more information, see Time Configuration on page 36.
To configure timer schedules:
1. Select the name of the schedule created on the Timer Global Configuration page.
2. Specify the time to turn off power. The time range is from 00:00 to 23:59.
3. Specify the day to turn off power by clicking the calendar icon and selecting the date.
4. If required, specify the end date by clicking the calendar icon and selecting the date.
5. If required, use the Recurrence Pattern and Daily Mode fields to customize the power
shutdown schedule.
6. Click Apply to save the settings for the selected timer.
7. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
To Next Page
Loading...
Need help?
General