Reference Manual for the ProSafe VPN Firewall FVS318v3
E-34 VPN Configuration of NETGEAR FVS318v3
January 2005
e. Select My Identity on the left hierarchy menu and program the screen as follows (see
Figure E-25):
•Under My Identity, select None for Select Certificate (since we are using a
Pre-Shared Key in this scenario). Then enter 12345678 for the Pre-Shared Key value.
(The Preshared-Key value must match the value you entered in the VPN Wizard for
the gateway Pre-Shared Key value shown in Figure E-20.)
•Under My Identity, select Domain Name for the ID Type and then enter fvs_remote.
(Domain Name must match the Remote Identity Data parameter of the IKE Policy
Configuration screen shown in Figure E-21 for the gateway router.)
Figure E-25: Scenario_1 My Identity screen parameters
Pre-Shared Key
must be the same
at both ends of
the VPN tunnel
To Next Page
Loading...
