NETGEAR FVS318 - ProSafe VPN Firewall Router User Manual

Reference Manual for the ProSafe VPN Firewall FVS318v3
Connecting the Firewall to the Internet 3-5
January 2005
With the VPN firewall router in its factory default state, your browser will automatically
display the NETGEAR Smart Wizard Configuration Assistant welcome page.
Figure 3-5: NETGEAR Smart Wizard Configuration Assistant welcome screen
Note: If you do not see this page, type http://www.routerlogin.net in the browser address bar
and press Enter. If you still cannot see this screen, see “How to Bypass the Configuration
Assistant” on page 3-10.
If you cannot connect to the VPN firewall router, verify your computer networking setup. It
should be set to obtain both IP and DNS server addresses automatically, which is usually so.
For help with this, see Appendix D, “Preparing Your Network or the animated tutorials on the
Resource CD.
2. Click OK. Follow the prompts to proceed with the Smart Wizard Configuration Assistant to
connect to the Internet.

NETGEAR FVS318 - ProSafe VPN Firewall Router Specifications

General

Model	FVS318
Category	Firewall
WAN Ports	1
LAN Ports	8
VPN Pass-through	Yes
VPN Tunnels	8
SPI Firewall	Yes
Data Link Protocol	Ethernet, Fast Ethernet
VPN Protocol	IPSec
Compliant Standards	IEEE 802.3, IEEE 802.3u
RAM	8 MB
Flash Memory	4 MB
Power Supply	External power adapter
Network / Transport Protocol	TCP/IP, UDP
Encryption Algorithm	3DES
Features	NAT support, URL filtering, DHCP server, DoS attack prevention
Status Indicators	Port status, power