58 | Chapter 5. Network Maintenance
NETGEAR N300 Wireless Router JWNR2000v2 User Manual
3. If the firmware version on the NETGEAR website is newer than the firmware on your router,
download the file to your computer.
4. To upload the newer firmware, select Maintenance > Router Upgrade to display the
following screen:
Click Browse
5. Click Browse, and locate the firmware you downloaded (the file ends in .img).
6. Click Upload to send the firmware to the router.
When the upload completes, your router restarts. The upgrade process typically takes
about one minute. Read the new firmware release notes to determine whether or not you
need to reconfigure the router after upgrading.
Manage the Configuration File
The router configuration settings are stored in a configuration file (*.cfg). This file can be
backed up to your computer, restored, or reverted to factory default settings.
Back Up
1. Select Maintenance > Backup Settings to display the following screen:
2. Click Backup to save a copy of the current settings.
3. Choose a location to store the .cfg file that is on a computer on your network.
To Next Page
Loading...
Need help?
General
