22 | Chapter 2. Router Internet Setup
NETGEAR N300 Wireless Router JWNR2000v2 User Manual
Select a Language for Your Screen Display
Using the Select Language drop-down menu, located in the upper right corner of the Router
Manager screen, you can display the router manager screens in any of languages shown in
Figure 2.
Figure 2. Select a Language
The language is set to English by default. The default language, as well as German, Russian,
and Portuguese are always stored in memory. When you select a language other than those
automatically stored in flash memory, if you are connected to the Internet at the time you
select it, that language is also stored in memory.
• If you are connected to the Internet and select a language that is not already stored in
flash memory, the language is downloaded from the NETGEAR server and stored in the
current language partition of flash memory.
• If you are not connected to the Internet when you select a language, you can only select
as the current language one of the languages that is stored in flash memory.
To specify a language to be used on your router manager screens, do the following:
1. Expand the list and select the language you want.
2. Click Apply.
The language you select is then downloaded and displayed in the language selection box,
and your screen display will be in the selected language.
To Next Page
Loading...
Need help?
General
