72 | Chapter 6. Advanced Settings
NETGEAR N300 Wireless Router JWNR2000v2 User Manual
Note: The reserved address is not assigned until the next time the
computer contacts the router’s DHCP server. Reboot the computer
or access its IP configuration to force a DHCP release and renew.
To edit or delete a reserved address entry:
1. Click the button next to the reserved address that you want to edit or delete.
2. Click Edit or Delete.
Advanced Wireless Settings
Select Advanced > Advanced Wireless Settings. The Advanced Wireless Settings screen
displays:
Advanced Wireless Settings
• Enable Wireless Router Radio. If you disable the wireless router radio, wireless devices
cannot connect to the JWNR2000v2 router. If you will not be using your wireless network
for a period of time, you can clear this check box and disable all wireless connectivity.
• Fragmentation Length, CTS/RTS Threshold, Preamble Mode and Transmit Power
Control. The Fragmentation Threshold, CTS/RTS Threshold, Preamble Mode, and
Transmit Power Control options are reserved for wireless testing and advanced
configuration only. Do not change these settings.
• WPS Settings. For information about these settings, see the section, Advanced Wireless
Settings on page 72.
To Next Page
Loading...
Need help?
General
