50 | Chapter 4. Content Filtering
NETGEAR N300 Wireless Router JWNR2000v2 User Manual
To set up port forwarding to a local server:
1. Select Advanced > Port Forwarding/Port Triggering. The Port Forwarding/Port
Triggering screen displays:
2. From the Service Name list, select the service or game that you will host on your network. If
the service does not appear in the list, see the following section, Add a Custom Service .
3. In the corresponding Server IP Address fields, enter the last digit of the IP address of your
local computer that will provide this service.
4. To the right of Server IP Address, click Add. The service appears in the list in the screen.
Add a Custom Service
To define a service, game, or application that does not appear in the Service Name list, you
must first determine which port number or range of numbers is used by the application. You
can usually determine this information by contacting the publisher of the application or user
groups or newsgroups. When you have the port number information, follow these steps:
1. Select Advanced > Port Forwarding/Port Triggering and then click Add Custom
Service. The Ports–Custom Services screen displays.
2. In the Service Name field, enter a descriptive name.
To Next Page
Loading...
Need help?
General
