48 | Chapter 4. Content Filtering
NETGEAR N300 Wireless Router JWNR2000v2 User Manual
Select Content Filtering > Logs. The Logs screen displays.
• Date and time. The date and time the log entry was recorded.
• Source IP. The IP address of the initiating device for this log entry.
• Target address.The name or IP address of the website or newsgroup visited or to which
access was attempted.
• Action. Whether the access was blocked or allowed.
If you change the check box selections, click Apply so that your changes take effect. You can
select as many or as few of these items as you wish.
To refresh the log screen, click the Refresh button.
To clear the log entries, click the Clear Log button.
To e-mail the log immediately, click the Send Log button.
Allow Inbound Connections to Your Network
By default, the JWNR2000v2 router blocks any inbound traffic from the Internet to your
computers except for replies to your outbound traffic. However, you might need to create
exceptions to this rule for the following purposes:
• To allow remote computers on the Internet to access a server on your local network.
• To allow certain applications and games to work correctly when their replies are not
recognized by your router.
Your router provides two features for creating these exceptions: port forwarding and port
triggering.
To Next Page
Loading...
Need help?
General
