Chapter 1. Hardware Setup | 7
NETGEAR N300 Wireless Router JWNR2000v2 User Manual
Unpack Your Router
Your box should contain the following items:
• N300 Wireless Router Model JWNR2000v2
• AC power adapter (plug varies by region)
• Category 5 (Cat 5) Ethernet cable
• Resource CD
• Installation guide with cabling and router setup instructions
If any parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton and original packing materials, in case you need to return the product for repair.
Hardware Features
Before you cable your router, take a moment to become familiar with the label and the front
and back panels. Pay particular attention to the LEDs on the front panel.
Label
The label on the bottom shows the router’s MAC address, serial number, security PIN, and
login information.
MAC address
Serial
WPS Security
number
PIN
Figure 1. Label on router bottom
Note: There are two models of the JWNR2000v2 router: one with a Power
On/Off button (shown here) and one without a Power button.
To Next Page
Loading...
Need help?
General
