46 | Chapter 4. Content Filtering
NETGEAR N300 Wireless Router JWNR2000v2 User Manual
3. Click Apply to save your settings.
Enable Security Event Email Notification
To receive logs and alerts by email, provide your email information in the E-mail screen and
specify which alerts you want to receive and how often.
Select Security > Email to display the following screen:
Fill in the fields as follows:
Turn Email Notification On. Select this check box if you want to receive email logs and
alerts from the router.
Your Outgoing Mail Server. Enter the name or IP address of your ISP’s outgoing (SMTP)
mail server (such as mail.myISP.com). You might be able to find this information in the
configuration settings of your email program. Enter the email address to which logs and alerts
are sent. This email address is also used as the From address. If you leave this field blank,
log and alert messages are not sent by email.
Send to This E-mail Address. Enter the email address where you want logs and alerts sent.
This email address is also used as the From address. If you leave this field blank, log and
alert messages are not sent by email.
My mail server requires authentication. If you use an outgoing mail server provided by
your current ISP, you do not need to select this field. If you use an email account that is not
provided by your ISP, select this field, and enter the required user name and password
information.
To Next Page
Loading...
Need help?
General
