Chapter 5. Network Maintenance | 63
NETGEAR N300 Wireless Router JWNR2000v2 User Manual
View Attached Devices
The Attached Devices screen presents a table of all IP devices that the router has discovered
on the local network. Select Maintenance > Attached Devices to view the following table:
For each device, the table shows the IP address, device name if available, and the Ethernet
MAC address. Note that if the router is rebooted, the table data is lost until the router
rediscovers the devices. To force the router to look for attached devices, click the Refresh
button.
Remote Management Access
Using the Remote Management feature, you can allow a user on the Internet to configure,
upgrade, and check the status of your JWNR2000v2 router.
To set up your router for remote management:
1. Select Advanced > Remote Management. The Remote Management screen displays.
To Next Page
Loading...
Need help?
General
