Table 3. DSL LED
Icon LED Activity Description
Solid green You have a DSL connection. In technical terms, the DSL port is
synchronized with an ISP’s network-access device.
Blinking green Indicates that the wireless modem router is negotiating the best possible
speed on the DSL line.
Off The unit is off or there is no IP connection.
Table 4. Internet LED
Icon LED Activity Description
Solid green You have an Internet connection. If this connection is dropped due to an
idle time-out but the DSL connection is still present, the light stays green. If
the Internet connection is dropped for any other reason, the light turns off.
Solid red The Internet (IP) connection failed. See No Internet Connection on page 88
for troubleshooting information.
Blinking green Data is being transmitted over the DSL port.
Off No Internet connection is detected or the device is in bridge mode (an
external device handles the ISP connection).
Table 5. Wireless Button and LED
Icon LED Activity Description
Icon is on the
Wireless
button
Solid green There is wireless connectivity.
Blinking green Data is being transmitted or received over the wireless link.
Off There is no wireless connectivity. You can still plug an Ethernet cable into
one of the LAN ports to get wired connectivity. See Turn Off Wireless
Connectivity on page 33 for more information about the use of this button.
Table 6. WPS Button and LED
Icon LED Activity Description
Icon is on the
WPS button
Solid green Indicates that wireless security has been enabled.
Blinking green WPS-capable device is connecting to the device.
Off WPS is not enabled. See Wi-Fi Protected Setup (WPS) Method on page 35
for more information about the use of this button.
Hardware Setup
11
N150 Wireless ADSL2+ Modem Router DGN1000
To Next Page
Loading...
Need help?
General
