NETGEAR N150

Hardware Setup
15
N150 Wireless ADSL2+ Modem Router DGN1000
2. Use the included phone cable with RJ-11 jacks to connect the ADSL port (A) of the wireless
modem router to the ADSL port (B) of the two-line ADSL microfilter.
B
A
CAUTION:
Incorrectly connecting a filter to your wireless modem router blocks your
DSL connection.
3. Connect the Ethernet cable (C) from a wireless modem router LAN port to the Ethernet
adapter (D) in your computer
C
D
.
4. Plug the power adapter into the AC power adapter input (labeled Power), and plug the other
end into a power outlet.
5. Connect any additional wired PCs to your router by inserting an Ethernet cable from a PC
into one of the three remaining LAN ports.