NETGEAR N150

Security Settings
55
N150 Wireless ADSL2+ Modem Router DGN1000
• To create a new service, click the Add Custom Service button to display the Add
Services screen.
• To edit a service, select its button on the left side of the table, and click Edit Service.
• To delete a service, select its button on the left side of the table, and click Delete
Service.
2. Use the following screen to define or edit a service.
‘
• Name. Enter a meaningful name for the service.
• Type. Select the correct type for this service. If in doubt, select TCP/UDP. The options
are TCP, UDP, TCP/UDP.
• Start Port and End Port. If a port range is required, enter the range here. If a single
port is required, enter the same value in both fields.
3. Click Apply to save your changes.