NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
Basic Virtual Private Networking 6-27
v1.0, October 2005
5. Click Done on the Summary screen (see Figure 6-27) to complete the configuration
procedure. The VPN Policies menu below displays showing that the new tunnel is enabled.
6. Repeat for the FVG318 on LAN B. Pay special attention and use the following network
settings as appropriate.
• WAN IP of the remote VPN gateway (e.g., 14.15.16.17)
• LAN IP settings of the remote VPN gateway:
— IP Address (e.g, 192.168.0.1)
— Subnet Mask (e.g., 255.255.255.0)
— Preshared Key (e.g., 12345678)
Figure 6-29