NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
VPN Configuration of NETGEAR FVG318 C-21
v1.0, October 2005
d. Select Security Policy on the left hierarchy menu and then select Aggressive Mode under
Select Phase 1 Negotiation Mode (see Figure B-16). (The Select Phase 1 Negotiation
Mode choice must match the Exchange Mode setting for the General IKE Policy
Configuration parameters shown in Figure B-13 for the gateway router.)
e. Select My Identity on the left hierarchy menu and program the screen as follows (see
Figure B-17 on page B-22):
•Under My Identity, select None for Select Certificate (since we are using a Pre-
Shared Key in this scenario). Then enter 12345678 for the Pre-Shared Key value.
(The Preshared-Key value must match the value you entered in the VPN Wizard for
the gateway Pre-Shared Key value shown in Figure B-12.)
Figure B-16