NETGEAR ProSafe FVG318

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
C-22 VPN Configuration of NETGEAR FVG318
v1.0, October 2005
•Under My Identity, select Domain Name for the ID Type and then enter fvs_remote.
(Domain Name must match the Remote Identity Data parameter of the IKE Policy
Configuration screen shown in Figure B-13 for the gateway router.)
f. Verify the Authentication (Phase 1) and Key Exchange (Phase 1) Proposal 1 screen
parameters (see Figure B-18) match the IKE SA Parameters of the IKE Policy
Configuration screen shown in Figure B-13 for the gateway router.
Figure B-17
Figure B-18
Pre-Shared Key
must be the same
at both ends of
the VPN tunnel