EasyManua.ls Logo

NETGEAR ProSafe FVG318

NETGEAR ProSafe FVG318
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
6-14 Basic Virtual Private Networking
v1.0, October 2005
The Pre-Shared Key that you configured in the FVG318.
Either a fixed IP address or a “fixed virtual” IP address of the VPN client PC.
a. In the Network Security Policy list on the left side of the Security Policy Editor window,
click on My Identity.
b. Choose None in the Select Certificate box.
c. Select IP Address in the ID Type box. If you are using a virtual fixed IP address, enter this
address in the Internal Network IP Address box. Otherwise, leave this box empty.
d. In the Internet Interface box, select the adapter you use to access the Internet. Select PPP
Adapter in the Name menu if you have a dial-up Internet account. Select your Ethernet
adapter if you have a dedicated Cable or DSL line. You may also choose Any if you will
be switching between adapters or if you have only one adapter.
Figure 6-12

Table of Contents

Other manuals for NETGEAR ProSafe FVG318

Related product manuals