1 SAFETY PRECAUTIONS
PAGE
1.3
1.9 Notes on inspection and repair
The statutory regulations on safety at work, accident prevention regulations and
environmental protection regulations oblige all commercial undertakings to protect
their employees, persons and the environment from the negative effects of handling
hazardous materials.
Important:
Machines and their parts may only be inspected / repaired if the ”Safety
clearance certificate (Technical Declaration)” has been filled in correctly
and fully by authorised and qualified personnel and is available.
The ”Safety clearance certificate (Technical Declaration)” can be
downloaded from our website at: ”https://pumpen.netzsch.com/” or
please contact our service team
(→ Chapter 16 - Contacts).
If special safety precautions are required when emptying and cleaning the machine,
the necessary information must be provided in the certificate.
The ”Safety clearance certificate (Technical Declaration)” is part of the
inspection/repair order and must always be filled in and signed when NETZSCH is to
carry out inspection/repair. However, the reserved right of NETZSCH to reject this
order remains unaffected.
issued: 15.03.2019 Revision: 6
text no.
01004-4/4
copy to:
11
To Next Page
Loading...
