Motors – Operating and Assembly Instructions
18 B 1091 en-3118
Interference immunity: For motors with integrated sensors (e.g. thermistors) the operator must ensure
adequate immunity to interference by the selection of a suitable sensor cable (possibly with screening,
with connection as for the motor supply cable) and evaluation device. The information and instructions
in the operating instructions for the inverter and all other instructions must be observed before
commissioning. After installation of the motor, it must be checked for correct functioning. In the case of
brake motors, the correct function of the brake must also be checked.
Pos: 35 /A nl eitu nge n/M otor en/ B10 91 D re hstro mm otor en/ 1. Al lg em eines /En ts org ung @ 7\ mod_1431354230589_388.docx @ 217778 @ 3 @ 1
1.3.10 Disposal
NOTICE
Environmental damage
Incorrect disposal of the product may cause damage to the environment.
• Ensure correct disposal
• Comply with current local regulations
Content: aluminium, iron, electronic components, copper
Please observe the additional documentation for the attachments
Pos: 37 /A nl eitu nge n/M otor en/ B10 91 D rehst romm otore n/2. I nstand haltu ng, Wart ung/ !1! Ins tandh altung und Wart ung @ 7\ mod_1431354436983_388.docx @ 217809 @ 1 @ 1
202
To Next Page
Loading...
