Gear units ā Operating and Assembly Instructions
36 B 1000 en-2518
Pos: 58 /A nl eitu nge n/G etr iebe /4. Inb etri eb nah me/ Einl aufz eit der Sch nec keng etr ie be [ B10 00] (2018-07-18 12:07:3 6) @ 3\mod_1369300565149_388.docx @ 71239 @ 2 @ 1
4.4 Running-in time for the worm gear unit
Information
-in time
In order to achieve maximum efficiency of the worm gear unit, the gear unit must be subjected to a running-in
period of approx. 25 h ā 48 h under maximum load.
There may be a reduction in efficiency before the running-in period is complete.
Pos: 59 /A nl eitu nge n/G etr iebe /4. Inb etri eb nah me/C hec klis te [ B1 000] @ 3 \mod_1369303360997_388.docx @ 715 79 @ 2 @ 1
4.5 Checklist
Checklist
Subject of check
Date
checked:
Information
see Section
Is the vent plug activated or the pressure vent screwed in? 3.4
Does the required configuration conform with the actual
installation?
6.1
Are the external gear shaft forces within permitted limits (chain
tension)?
3.6
Is the torque support correctly fitted? 3.7
Are contact guards fitted to rotating components? 3.9
Is the automatic lubricant dispenser activated? 4.2
Is the cooling cover connected to the cooling circuit? 3.12
4.3
Pos: 61 /Anlei tunge n/Ge triebe /5. Ins pekti on und W artung /5. Ins pekti on und War tung (2018-07-17 1 4:00:23) @ 3\mod_1368691909479_388.docx @ 65696 @ 1 @ 1
148
To Next Page
Loading...