EasyManua.ls Logo

NETZSCH NM125BY B.1 Series - Applied Standards; Type Plate for NORD Ex Eb Motors According to en 60079

Default Icon
211 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Motors – Operating and Assembly Instructions
28 B 1091 en-3118
Pos: 67 /A nl eitu nge n/M otor en/ B10 91 D re hstro mm otor en/ 3. AT EX /T ype nschi ld N ORD E xeb- M ot oren nac h EN 6 007 9 [EX E] @ 7\ mod_1431413894090_388.docx @ 218163 @ 3 @ 1
3.1.10 Type plate for NORD Ex eb motors according to EN 60079
1 Data Matrix Code
2 Identification number of designated body
3 Number of phases
4 Type designation
5 Order number / motor number
6 Year of manufacture
7 Thermal class of the insulation system
8 IP protection class
9 Operating mode
10 Standard specifications
11 Nominal frequency
12 Nominal voltage
13 Permissible voltage range
14 EC prototype test certificate number
15 Power factor
16 Speed
17 Explosion protection marking
18 Starting current / nominal current
19 tE times
20
Note: TMS with specification of tA time only with
PTC triggering device in accordance with
II (2)G PTC DIN 44082
21
Notice! Pay attention to operating instructions
B1091
22 Rated power (mechanical power delivered to shaft)
23 Nominal current
24 Individual serial number
25 Efficiency
Pos: 68 /A nl eitu nge n/M otor en/ B10 91 D re hstro mm otor en/ 3. AT EX /T ype nschi ld N ORD E x_- Mo toren _Ergänz ung [EX E, EXN, EX - FU-B etrieb EX tb, tc] @ 11 \mod_1460031690739_388.doc x @ 316441 @ @ 1
Before commissioning, the type plate must be compared with the requirements of the aforementioned
declaration, which result from the local regulations and operating conditions.
Pos: 69 /A nl eitu nge n/M otor en/ B10 91 D re hstro mm otor en/ 3. AT EX /T ype nschild NORD Ex_- Motor en - Erklärung der Normenangabe [EXE, EXN] @ 7\mod_1431426076094_388.doc x @ 218829 @ 5 @ 1
Explanation of standard specification in rating plate
EN 60034 (H), (A)/ EN 60079
Used range of standards for explosion protection
(Please pay attention to conformity declaration.)
Voltage range A in accordance with EN 60034-1
Half key balancing in accordance with EN 60034-14
Product standard
Pos: 70 /Anlei tung en/M ot ore n/B1 091 Dr ehst rom mot ore n/3. AT EX/ Ang ewan dt e Nor me nstä nde [E XE] @ 7 \mod_1431416054800_388.doc x @ 218194 @ 3 @ 1
3.1.11 Applied standards
EN Standard Edition IEC Standard Edition
EN 60034-7 2001-12 IEC 60034-7 2001-02
EN 60034-6 1996-08 IEC 60034-6 1991-10
EN 60079-0 2014-06 IEC 60079-0 2011, modified; cor.:2012; cor.:2013
EN 60079-7 2015 IEC 60079-7 2015
EN 60529 2014-09 IEC 60529 1989 +A1:1999 + A2:2013
Pos: 71 /A llg em ein/ Allg em eing ülti ge M od ule/ ---------- Seitenu mbr uch ---------- @ 1\mod_1329145698658_0.docx @ 15891 @ @ 1
212

Table of Contents