13 DISMANTLING AND ASSEMBLY
OF SPECIAL UNITS
PAGE
13.5
Dry Running Protection Device Stator Protector STP-2A
PAGE
1 Functioning principle 13.6
2 Technical Data 13.6
3 Safety Precautions 13.6R
4 Installation of Temperature Sensor and Controller 13.6R
5 Set Point Parameters 13.10
6 Determing the Cut-Off Temperature (Setpoint) 13.10R
7 Setting the First and Second Cut-Off Temperature S1 and S2 13.10R
8 Switching and Alarm Functions 13.10R
9 Terminals of the Temperature Controller 13.11
10 Wiring Diagram STP-2A with Safeguard Barrier for 3-wire PT100 13.12
issued: 14.10.2019
Revision: 23
text no.
13105-1/8
copy to:
83
To Next Page
Loading...
