EasyManua.ls Logo

NETZSCH NM125BY B.1 Series - Page 9

Default Icon
211 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 SAFETY PRECAUTIONS
PAGE
1.2
- Because the required time intervals for cleaning and maintenance work depend
very heavily on the conveyor medium and the other operating conditions, it is not
possible in most cases to give fixed intervals.
The required intervals for cleaning and maintenance must be
determined and laid down by the operator in operation.
1.6 Unauthorised modifications, use of original parts
- Modification or changes to the machine are only permissible upon consultation
and with the written agreement of NETZSCH.
- For reasons of operating and equipment safety, the supplied machines may only
be operated with original spare parts and accessories and auxiliary materials
authorised by NETZSCH in accordance with NETZSCH specifications.
- Any warranty is void if other parts or materials are used!
1.7 Specified use, improper application
This machine is solely for the purposes of conveying the conveyor media, referred to
the data sheet ( Chapter 15) and under the operating conditions which are also
described there.
Any usage which goes above and beyond this must be agreed with NETZSCH in all
cases and shall only be permitted following written approval from NETZSCH.
The operational safety of the supplier machine is only guaranteed if it is used for its
specified purpose.
This machine has been designed on the basis of defined operating conditions. The
limit values for the operating conditions are specified on the data sheet ( Chapter
15) and must be observed in all cases.
As a result of the application of current EU law in the field of system operator's liability
and the associated issues surrounding permission to operate a system, we would like
to draw your attention to a requirement for operation that is mandatory for our
products:
Spare parts and expendable parts from other manufacturers are not
authorised for use in our products and breach the operating
instructions delivered to you with the product.
Using spare parts from other manufacturers may have a negative
impact on operating safety and safety at work. Any use of our
products with spare parts from other manufacturers is not
permitted.
In the event that products are used with spare parts from other
manufacturers, any consequences for the operating licence of your
overall facility and any consequences under liability law shall be
your sole responsibility.
issued: 15.03.2019 Revision: 6
text no.
01004-3/4
copy to:
9

Table of Contents

Related product manuals