BA 3001 En – Edition 2.0 * 345001b320.fm 3-7
Operation
Check lists
The checklists below are intended to assist you in checking and monitoring the machine
before, during and after operation.
These checklists cannot claim to be exhaustive; they are merely intended as an aid for you
in fulfilling your duties as a conscientious operator.
The checking and monitoring jobs listed below are described in greater detail in the
following chapters.
If the answer to one of the following questions is NO, first rectify the cause of the fault
before starting or continuing work.
Start-up checklist
Check the following points before putting the machine into operation or starting the engine:
No.
Question
✔
1
Enough fuel in the tank? (➠ 5-3)
2
Coolant level OK? (➠ 5-10)
3
Remove water in the diesel fuel prefilter (➠ 5-4)
4
Engine oil level OK? (➠ 5-7)
5
Oil level in hydraulic oil tank OK? (➠ 5-17)
7
V-belt condition and tension checked? (➠ 5-14)
8
Lubrication points greased? (➠ 5-33)
9
Check hydraulic hoses, connections and ram seals for leaks
10
Firm position of battery terminals
11
Tyres checked for cracks, cuts etc. ? (➠ 5-22)
12
Footholds clean?
13
Engine cover locked with the buckle? (➠ 3-21)
14
Especially after cleaning, maintenance or repair work:
➥ Rags, tools and other loose objects removed?
15
Correct seat position? (➠ 3-19)
16
Rollbar raised?
17
Seat belt fastened? (➠ 3-20)
To Next Page
Loading...