EasyManua.ls Logo

Neuson 3001 - Strapping down the Machine; Battery Master Switch

Default Icon
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-30 BA 3001 En – Edition 2.0 * * 345001b330.fm
Operation
Strapping down the machine
The machine must be loaded and transported properly –
Danger of accidents!
It is essential that you read the safety instructions at the beginning of this
chapter and follow any other safety instructions relevant in your country!
Secure the wheels of the dumper at the front, rear and at the sides
Firmly strap down the dumper at the eye hooks H onto the platform, with belts or
chains of adequate size
Make sure the driver of the transport vehicle knows the overall height, width and
weight of his vehicle (including the dumper) before moving off, and the legal transport
regulations of the country or countries in which transport will take place!
3.20 Battery master switch
Do not disconnect the battery while the engine is running.
Power supply is interrupted directly after the battery, by means of a key
Before working on the electric system
Interrupting power supply:
Turn key A of the battery master switch to position B and remove it
Switching on power supply:
Insert key A in the battery master switch
Turn the key down to the notched position C
Fig. 46: Strapping down the machine
H
H
H
Fig. 47: Battery master switch
A
C
B

Table of Contents