Neuson 3001 - Driving the Dumper

BA 3001 En – Edition 2.0 * 345001b320.fm 3-9
Operation
3.6 Driving the dumper
Preheating start switch: overview
Accelerator pedal: overview
The accelerator pedal controls the revs as follows:
• Speed can be set continuosly with accelerator pedal 26
☞ Press down the accelerator pedal:
➥ Engine speed rises
☞ Reduce the pressure on the accelerator pedal:
➥ Engine speed is reduced
1
0
2
3
Fig. 19: Preheating start switch
40
Position
Function Power consumer
0
Insert or remove the ignition key None
1
ON/drive position
All functions are operational
➥ Telltales come on
2
Preheats the engine (10 – 15
seconds)
➥ Until the preheating telltale
goes out
3
Starts the engine
➥ Starter is actuated
➥ Telltales must go out
Fig. 20: Accelerator pedal
26