BA 3001 En – Edition 2.0 * 345001b530.fm 5-29
Maintenance
Exterior of the machine
Cleaning the machine can cause engine damage.
☞ Protect the engine against humidity
The following articles are generally suitable:
• High-pressure cleaner
• Steam jet
Engine compartment
Clean the engine at engine standstill only –
Danger of personal injury!
☞ Switch off the engine before cleaning
When cleaning the engine with a water or steam jet
☞ The engine must be cold
☞ and do not point the jet directly at electric sensors such as the oil pressure
switch.
The humidity penetrating any such sensors causes them to fail and leads to
engine damage!
Screw connections and attachments
All screw connections must be checked regularly for tightness, even if they are not listed in
the maintenance schedules.
☞ Engine fastening screws
☞ Fastening screws on the hydraulic system
☞ Line and pin fastenings on the attachment
Retighten loose connections immediately. Contact an authorised workshop if necessary.
Pivots and hinges
Lubricate all mechanical pivots on the machine (such as joints) and fittings at regular
intervals even if they are not listed in the lubrication plan.
To Next Page
Loading...