Nexo LS18 User Manual

Page 16/106 GEO S12 SETUPS ON NEXO TD CONTROLLERS
4 GEO S12 SETUPS ON NEXO TD CONTROLLERS
4.1 NXAMP TDControllers
As of today, load 3.15 features the setups listed in below table in the “Nexo configurations” menu.
Keep in mind that the “custom configuration menu” allows to build any combination of NEXO speakers
with
- full phase compatibility from 20 Hz to 20kHz.
- Choice between 85 Hz and 120 Hz X-over point between LS18 and Geo S12.
Please consult www.nexo-sa.com for upgrade releases.
Setup Name
#
CH1
CH2
CH3
CH4
S1210 AC WB
LF(1-3) HF(2-4)
50
S1210 LF 50-1k
S1210 HF 1k-20k
S1210 LF 50-1k
S1210 HF 1k-20k
S1210 PA WB
4 Channels
53
S1210 PA 50-20k
S1210 PA 50-20k
S1210 PA 50-20k
S1210 PA 50-20k
S1210 PA XO (2-4)
LS18 (1-3)
55
LS18 35-85
S1210 PA 85-20k
LS18 35-85
S1210 PA 85-20k
S1230 AC WB
LF(1-3) HF(2-4)
56
S1230 LF 50-1k
S1230 HF 1k-20k
S1230 LF 50-1k
S1230 HF 1k-20k
S1230 PA WB
4 Channels
59
S1230 PA 50-20k
S1230 PA 50-20k
S1230 PA 50-20k
S1230 PA 50-20k
S1230 PA XO (2-4)
LS18 (1-3)
60
LS18 35-85
S1230 PA 85-20k
LS18 35-85
S1230 PA 85-20k

Nexo LS18 Specifications

General

Brand	Nexo
Model	LS18
Category	Speaker System
Language	English