Nexo LS18

GEO S12 HARDWARE SETUP PROCEDURE Page 47/106
8.4 GEO S12 in touring applications
8.4.1 Touring Accessories
Accessories are :
 Bumper (GPT-BUMPER)
 Geo S12 Rigging Plates (GPT-XBOW)
 LS18 rigging plates (LST-XBOW)
 Tension Mode Link Bars for GPT-XBOW (GPT-TLB)
 Lifting Ring for GPT-SSBRK, GPT-PSBRK or VNT-TTC (VNT-XHBRK)
 Truss hook for GPT-SSBRK, GPT-PSBRK or VNT-TTC (VNT-TCBRK)
 “U” Bracket for single horizontal GEO S12 on pole stand, lifting ring or truss hook (GPT-
SSBRK)
 U” Bracket for two horizontal GEO S12 on pole stand, lifting ring or truss hook (GPT-
PSBRK)
 Flying Bar for single vertical GEO S12 (VNT-TTC)
 Ground Stacking device for up to 6 GEOS1210 (GPT-GSTK)
Please refer to section 13.3 of this manual for more information of above references.
GPT- BUMPER GPT-XBOW
GPT-TLB VNT-XHBRK VNT-TCBRK
GPT-SSBRK GPT-PSBRK
VNT-TTC GPT-GSTK