Nexo LS18 User Manual

GEO S12 HARDWARE SETUP PROCEDURE Page 43/106
8.3.6 LS18 and GEO S12 vertical array cable mounted on a ceiling
Required items
 As in 2 sections above, plus
 2 x VNI-LBRK (allows cable suspension for bumper, holes for cable suspension are 10mm
diameter);
 4 slings and shackles (not provided)
IMPORTANT
Ensure that the ceiling is strong enough to hold 4 times LS18 & GEO S12 cluster weight
and that the cables suspension system required fixing the bumper under the ceiling is
properly dimensioned.
Procedure
 Connect the bumper and the two “L” brackets using the screws, washers and bolts
provided in the VNI-LBRK kit;
 Proceed as in preceding sections;
 4 slings and 4 shackle (not provided) are required to secure the cluster under the ceiling;

Nexo LS18 Specifications

General

Brand	Nexo
Model	LS18
Category	Speaker System
Language	English