Nice ROBO500 - Technical Specifications of Product

TECHNICAL SPECIFICATIONS OF PRODUCT
n Mains power supply 230 Vac 50 Hz
n Motor Asynchronous-single phase
n Limit switch type Electromechanical
n Max. power absorption 400 W
n Line Absorption 1.7 A
n Built-in capacitor 12 nF
n Protection rating IP 44
n Maximum torque 15 Nm (500 N)
(corresponding to force)
n Nominal torque 8 Nm (270 N)
(corresponding to force)
n Nominal speed 0.18 m/s
n Thermal protection 140 °C
n Maximum leaf weight 500 Kg
n Maximum leaf length 7 m
n Max. No. Cycles per hour 9 (leaf 7 metres)
n Max. No. consecutive Cycles 5
n Dimensions 290 x 195 x h 250 mm
n Weight 8 Kg
n Max. Service current 24 V 150 mA (voltage can vary by
± 25%)
n Flashing light output For connection of ashing
light to power mains
(Max. power 40 W)
n Operating temperature From -20 °C to +50 °C
n Work time Adjustable from 2.5 to > 40 s.,
or from < 40 to > 80 s.
with TLM
n Pause time Adjustable from 5 to > 80 s.
n Decoding “O-Code” / “FloR” / “TTS”;
or Flo”; or “Smilo”
n Reception frequency 433.92 MHz
n Sensitivity Better than 0.5 V
n Operating temperature from -20 to +55° C
n Input impedance 52 ohm
English – 7
EN