Nice ROBO500 - Safety Warnings and Precautions; Manually Releasing or Locking the Gearmotor

8 – English
MANUALLY RELEASING OR LOCKING THE GEARMOTOR
The gearmotor is equipped with a mechanical system that enables manual
opening and closing of the gate.
These manual operations must be performed in the event of a power fail-
ure or system malfunctions. In the latter case, use of the release mecha-
nism may be useful also to check whether the fault is linked to the mecha-
nism itself (e.g. it may be incorrectly tightened).
To manually release the gearmotor, use the release key supplied as follows:
01.Slidethelockcoverbackwards;
02. Insertthekeyintherelativereleasepin;
03.Turnthekeyclockwisethrough90°andpullthehandletowardsyou;
04. At this point the gate leaf can be moved manually to the required posi-
tion.
05. To restore normal automation operation, close the handle, turn the
key anti-clockwise on the release pin and manually move the gate leaf
until you hear the leaf engage mechanically with the drive mechanism.
06. Then remove the key from the release pin and store in a safe place.
IMPORTANT – This instruction sheet contains important informa-
tion regarding safety; take care to read all instructions before using
the product. Keep this manual in a safe place to enable future use.
SAFETY WARNINGS AND PRECAUTIONS
NEVER touch parts of the automation while the gate is moving!
•Beforeusingtheautomationforthersttime,takecaretoreadthis
operation manual provided by the automation installer. Also ensure that
you are fully informed of all origins of residual risks.
•Keepthemanualforconsultationwhenindoubtandensuresupplyto
new owners of the automation.
•Yourautomationisamachinethatperformscommandsimpartedbythe
user;negligentorimproperusemayconstituteahazard.Neveractivate
automation controls if persons, animals or objects are present in the oper-
ating range.
•Children: this automation system guarantees a high level of safe-
ty, using special detection devices to prevent movement in the
presence of persons or objects . thereby guaranteeing constant
foreseeable and safe activation. However, it is advisable to ensure
that children do not play in the vicinity of the automation. To avoid
inadvertent activation, and remote controls should always be kept
out of reach. (the transmitter is not a toy!).
•Checktheautomationfrequentlytodetectpossibleimbalance,signsof
wear or damage. Suspend use immediately if maintenance is required.
•Periodicallycheckcorrectoperationofthephotocellsandperformthe
scheduled maintenance at least every six months.
•Photocellsdonotconstituteactualsafetydevices,butsafetyaids.They
are designed using highly reliable technology, but in extreme conditions
may be subject to malfunctions or potential faults. CAUTION!– In certain
cases these faults are not immediately evident.
Never pass the transit area while the gate is moving!
•Ifanyanomalousconditionisnotedontheautomation,disconnectthe
power supply from the system immediately. Never attempt to repair the
automationalone;contactyourlocalinstallerforassistance.Inthemean-
time the system can be used with manual Opening and Closing by manu-
ally releasing the gearmotors as described in this manual.
•Intheeventofapowerfailure,onrestoralofpowertherstmanoeuvre
command will be executed at low speed, regardless of the type of speed
set.
•Evenifyoupossesstheskills,nevermodifythesystemorautomation
programming and adjustment parameters: This is the responsibility of the
automation installer.
•Testing,periodicmaintenanceandanyrepairsmustbedocumentedby
the person performing the operations and the relative documents must be
kept by the system owner.
•Attheendoftheautomation’slifetime,ensurethatitisdisposedbyqual-
iedpersonnelandthatthematerialsarerecycledorscrappedaccording
to current standards in the place of use.
OPERATION MANUAL
(to deliver to the automation user)
EN