Nikon D100 VBA10201 - Page 29

VBA10201-R.3577.A
- -
……………………………………………………………………… A20
……………………………………………………………………… A20
……………………………………………………………………… A21
…………………………………………………… A21
…………………………………………………………………… A22
…………………………………………………………… A22
………………………………………………………… A23
……………………………………………………… A24
………………………… A25
……………………………………………………… A26
……………………………………………………………… A26
…………………………………………………………………… A27
…………………………………………… A27
…………………………………………………………………… A28
………………………………………… A29
…………………………………………………… A30
………………………………………………………………… A31
……………………………………………………………………… A32
…………………………………………… A33
……………………………………………………………… A33
……………………………………………… A34
……………………………………………… A35
……………………………… A36
……………………………………………………………… A36
……………………………………………………………………… A37
…………………………………………………………… A38
………………………………………… A39
…………………………………………………………………………… A40
SB PCB Unit
CF PCB Unit
I/F PCB Unit
3. MOUNTING BOTH THE FRONT AND THE REAR BODIES
Mount Front Body to Rear Body
Main Condensor
Power Drive PCB Unit
Top Cover
1. SB Unit and Small Parts
2. Mode Dial and Small Parts
3. Outer LCD Unit, Command Dials and Top Cover FPC
4. Mount Top Cover to Body
5. Mount the Screws
6. Solder Wires
Grip Cover, I/F Cover and Front Cover
DC/DC PCB Unit
ADJUSTMENT FOR THE BODYBACK
ADJUSTMENT THROUGH PC
AF ADJUSTMENT
CCD PCB Unit
Memory Compression PCB
1. Afx the Memory Compression PCB
2. Connect the FPCs
Back Cover
1. Assemble the Monitor PCB Unit
2. Assemble the CF Card Cover Unit
3. Pass the connection FPC through the squere hole
4. Mount the screws
Bottom Cover
Adjustment through PC operation required at replacement of part(s)
1.
Adjustment Software
2. Shooting Image Adjustment Software
Shooting Image Adjustment
1. Outline