Nikon D100 VBA10201 - Back Cover Removal

VBA10201-R.3577.A
- Ｄ2 ･ -
Back Cover
Disconnect the TFT PCB
connection FPC from the
slider.
#827
#821x2
#615x2
CF card eject button
2. Removal of Screws
• Remove 5 screws.
• Open the CF cover. Then remove the back cover as letting go the CF card eject button.
1. Removal of Connection FPC
WARNING
There are high voltege parts inside. Be careful of this electric shock,
when you remove the cover.
You must discharge the main condenser according to the instruction
of this repair manual before you remove the cover.
!