- Ａ ･ -
VBA18001-R.3719.A
logo�Q0440�forGraphic
070518�Gdesign�ito
If this program is used by the USB interface, installing the USB driver is necessary.
But if OS is "Windows XP", the driver is already incorporated so it is not necessary to install it.
1. Set the USB of camera to "PTP".
(SETUP menu → USB setting → PTP)
2. Connect the camera and PC by USB cable.
Turn camera ON.
3. "Add New Hardware Wizard" is displayed, then "4." screen appears automatically.
[Procedure for installing USB driver ]
4．Click "Yes".
5． Click "Reference". Select "C:\DeskTopLauncher\D-SLR\D3\PTPC " of C drive, and click "OK".
6. Reboot the PC and the install is completed.
To Next Page
Loading...
