Contents
1-3
6. Connection between the Laser Unit and the Microscope ............................................................ 1-213
6.1 Setting and Connecting the TI-LUSU Shutter Unit..................................................................... 1-213
6.1.1 Control System Selection............................................................................................... 1-214
6.1.2 Control Mode of the Shutter Unit ................................................................................... 1-214
6.1.3 Setting and Connecting the TI-LU4SU Shutter Unit LU4............................................... 1-215
6.1.4 DIP Switch Settings ....................................................................................................... 1-217
6.1.5 Communications Commands......................................................................................... 1-219
6.2 Attaching the Optical Fiber to the Light Source ......................................................................... 1-222
6.3 Replacement of Optical Path Switch Mirror ............................................................................... 1-224
6.4 Installing the N-STORM Kit ........................................................................................................ 1-226
7. Confirmation and Check Sheet ....................................................................................................... 1-228
7.1 Checking Procedure................................................................................................................... 1-228
7.2 Check Sheet............................................................................................................................... 1-229
8. Specifications and Performance..................................................................................................... 1-231
8.1 Overall Configuration ................................................................................................................. 1-231
8.1.1 TIRF Illuminator Unit / Motorized TIRF Illuminator Unit― Configuration for Normal
Microscopy (Except N-STORM)..................................................................................... 1-231
8.1.2 Motorized TIRF Illuminator Unit ― Configuration for N-STORM................................... 1-232
8.1.3 Photo Activation Illuminator Unit .................................................................................... 1-234
8.1.4 Mountable lasers............................................................................................................ 1-235
8.1.5 TI-LUSU Shutter Unit ..................................................................................................... 1-238
8.1.6 AC Adapter for the TI-LUSU Shutter Unit ...................................................................... 1-238
8.1.7 Power Cord for the AC Adapter of the TI-LUSU Shutter Unit ........................................ 1-238
8.2 Environmental Conditions .......................................................................................................... 1-239
8.2.1 Normal Microscopy (Except N-STORM)........................................................................ 1-239
8.2.2 N-STORM ...................................................................................................................... 1-239
8.3 Safety Standards Compliance.................................................................................................... 1-240
8.3.1 Normal Microscopy (Except N-STORM)........................................................................ 1-240
8.3.2 N-STORM ...................................................................................................................... 1-241
To Next Page
Loading...
Need help?
General